ACT-HSC-22 Heat Sink Coolers

Key Features of the ACT-HSC-22HSC Prof photo

  • A  passive sealed enclosure cooler consisting of two high performance, aluminum finned heat sinks bonded to the opposite sides of a common mounting plate
  • Rated thermal conductance: 22 Watts of heat dissipation per °C of temperature difference between the enclosure inside air and the ambient air (excluding any heat dissipation/leak through the enclosure walls)
  • “Thin profile”, i.e., only 3.70″ intrusion into the enclosure
  • High performance/cost ratios due to the innovative use of advanced heat transfer and manufacturing technologies
  • Minimum number of penetrations by cover fasteners, mounting fasteners and external fan wires
  • Dual axial ball bearing fans for years of maintenance free operation
  • 1-Year Warranty (see ACT’s Terms and Conditions)

ACT-HSC-22 Heat Sink Cooler

    Part Number Thermal Conductance Watts/°C Thermal Capacity Watts @ 20°C Delta T Weight (lbs.) H (in”) W (in”) D* (in”)

   ACT-HSC-22

22.0 440 15.0 12.00 12.00 7.88

                                                                                                                                                       Note: * Extends 3.70″ into enclosure

HSC 22 data bar

 

Environment……………………………………………. Indoor or Outdoor Use

Electrical Configuration……………………….………..115VAC, 230VAC, 12VDC, 24VDC and 48VDC
………………………………… ……………….……….  – AC units arrive with 6ft. long 3-pronged plug
……………………………… ………………….……….  – DC units arrive with bare lead wires

NEMA Options……………………………………………….. 12, 3R, 4 and 4X (UL50E Certified)

Fans……………………………………………………………. UL Listed 6.0” dual ball bearing type axial fans (dry & wet locations)

Mounting Plate………………………………………………… Aircraft quality 6061 aluminum

HSC Housing………………………………………………….. Powder coated aluminum, Optional: stainless steel

Mounting Options……………………………………………. Top, side, front or back

Accessories…………………………………………………… Rain guards and removable filters

 

HSC-22 graphic

 

HSC-22 filter 3R