Lancaster, PA January 8, 2018 – Advanced Cooling Technologies, Inc. (ACT) announced today the launch of its thermoelectric air conditioners for industrial and commercial sealed enclosure cooling applications. This is ACT’s fourth addition to their growing line of industrial and commercial enclosure cooling products.
The ACT-TEC Thermoelectric Enclosure Coolers are compact solid state air conditioners designed to cool the internal enclosure space with highly reliable Peltier cooling. The Peltier cooling cycle involves no moving parts, compressors, CFC refrigerants or circulating liquid, and is therefore inherently reliable, durable and low noise. The use of high reliability fans in combination with solid state Peltier devices in ACT-TEC products assures long life 24 hours per day seven days a week operation. The ACT-TEC product series are available in two power ranges of 90 Watts and 300 Watts of cooling.
ACT-TEC products can be used in wash-down, spray-down enclosure applications, or mounted directly to outdoor cabinets for flawless year-round operations. Standard stocked units are available in under a week. Dual mode operation of cooling and heating and corrosion resistant NEMA 4X, 316 stainless steel versions are also available.
Sealed enclosure coolers are used to dissipate heat inside enclosures that house and protect electrical/electronic equipment from harmful environmental elements like salt spray, dust, and airborne chemicals. These enclosures or cabinets are typically rated to a National Electrical Manufacturers Association (NEMA) standard. For example, a NEMA 12 cabinet is for indoor use and protects against drips, dust and falling dirt, while a NEMA 4 cabinet is for outdoor use and must be water tight. Sealed enclosure coolers are required to efficiently transfer heat from the inside space to the outside environment while maintaining the NEMA rated seal.
“Sealed Thermoelectric enclosure coolers are a logical technology extension of the many products that ACT currently manufactures for satellite, defense, medical and HVAC markets”, said Mr. Mark Stevens, Sr. Business Development Manager at ACT, “and they add an active (sub ambient) cooling dimension to ACT’s existing, more passive cooling products such as ACT-Heat Sink and ACT-Heat Pipe Coolers”.
More information about ACT’s Thermoelectric enclosure cooling products, including technical data, selection tool and online ordering, can be found at: www/1-ACT/Enclosure-Cooling
ACT specializes in advanced thermal technology development and custom thermal product manufacturing. ACT designs and manufactures cold plates, HiK™ plates, heat pipes, heat exchangers, pumped liquid and two-phase loops, and thermal storage devices for customers in diverse markets including Aerospace, Electronics, Temperature Calibration, Medical Device, LED, and Energy Recovery Systems.
ACT’s team consists of personnel with established track records in technology development, commercialization and production. Many of them were involved in the pioneering work on heat pipes, loop heat pipes and other single and two-phase heat transfer devices. They are the inventors/co-inventors on numerous U.S. and international patents and the authors/co-authors of hundreds of scientific publications.
ACT’s facility measures more than 50,000 square feet, including office, laboratory and manufacturing spaces. With ISO9001 and AS9100 certified quality system in place, the facility has designed and manufactured high quality and cost effective thermal management solutions for dozens of mission critical satellite and military programs as well as for numerous commercial applications.
For more information about ACT, please visit www.1-ACT.com