ACT to Showcase 10 kW Level Power Electronics Coolers at APEC 2017

Loop Thermosyphon

Lancaster, PA – February 26, 2017 – Advanced Cooling Technologies, Inc. (ACT), announced today it will be highlighting a new High Performance Power Electronics Cooler at this year’s Applied Power Electronics Conference (APEC) being held at Tampa, FL, March 27-30.  Tests have shown the new High Performance Power Electronics Coolers are capable of passively transferring more than 11kW’s of waste heat with no power, no noise, and no moving parts.  The coolers utilize thermosyphon technology which can move large amounts of waste heat very efficiently.

According to Devin Pellicone, Lead Engineer for this new product development effort, “The prevailing thermal packaging strategy in medium voltage drives has been to transfer waste heat from a cold plate, densely populated with power electronics modules, to a remotely located air-cooled radiator for dissipation. Existing solutions achieve this by utilizing a number of heat pipes embedded in the cold plate, which has limitations on the amount of energy that can be efficiently absorbed. Our new products allow us to passively remove two to three times more waste heat than previous generations of thermal technologies, while maintaining the same package size.”

Dr. Rich Bonner, Manager of ACT’s Custom Products Group, added “Our power electronics customers have an insatiable desire for thermal technologies capable of removing waste heat at higher power densities.  Our current customers are now pushing us hard to launch the next generation of thermal solutions that will push to even higher performance levels.  The market demand for our increasing capabilities has been strong.”

At exhibit booth 723, ACT will also be highlighting its other Thermal Management Solutions including passive heat pipes, PCM Heat Sinks and Pumped Two Phase Cooling.

For more information, please visit our website www.1-ACT.com

ABOUT ACT

ACT specializes in advanced thermal technology development and custom thermal product manufacturing. ACT designs and manufactures cold plates, HiK™ plates, heat pipes, pumped liquid and two-phase loops and thermal storage devices for customers in diverse markets including Aerospace, Electronics, Temperature Calibration, Medical Device, and Energy Recovery Systems.

ACT’s team consists of personnel with established track records in technology development, commercialization and production. Many of them were involved in the pioneering work on heat pipes, loop heat pipes and other single and two-phase heat transfer devices. They are the inventors/co-inventors on numerous U.S. and international patents and the authors/co-authors of hundreds of scientific publications.

The R&D team at ACT has engineers with backgrounds in mechanical, electrical, chemical, aerospace, nuclear, materials, manufacturing and physics. Their expertise assures we can serve wide variety of material, thermal and modeling challenges in diverse applications.

ACT’s Facility measures more than 50,000 square feet, including office, laboratory and manufacturing spaces. With ISO9001 and AS9100 certified quality system in place, the facility has designed and manufactured high quality, cost effective, thermal management solutions for dozens of mission critical satellite, and military programs as well as for numerous commercial applications. Simultaneously ACT’s broad and diverse R&D efforts are developing thermal solutions for tomorrow’s emerging technologies.

For more information about ACT, please visit www.1-ACT.com.

MEDIA CONTACT

Amanda Hershey
Marketing Specialist
E-mail: Amanda.Hershey@1-ACT.com
Phone: +1 (717) 205-0625
www.1-ACT.com

Have a Question?

  • This field is for validation purposes and should be left unchanged.