ACT Logo
|ADVANCED COOLING TECHNOLOGIES
0
Cart Icon
Contact Us
  • Thermal Solutions
    • Passive Thermal Solutions
      • Heat Pipes
        • HiK Plates­™/ Heat Pipe Assemblies
        • Pulsating Heat Pipes
        • Vapor Chambers
        • High Temperature Heat Pipes
      • Loop Thermosyphon
      • Phase Change Based Solutions
        • PCM Heat Sinks
      • Liquid Cold Plates
    • Active Thermal Management Solutions
      • Liquid Cooling
      • Pumped Two-Phase
      • Liquid-Air HX
      • Tekgard® ECUs
      • Vaphtek™ ECU
      • Tekgard® Chillers
    • Embedded Computing Solutions
      • ICE-Lok®
      • VME/ VPX Card Frames
      • Conduction Cooled Chassis
      • Liquid Cooled Chassis
    • Enclosure Cooling Products
      • HSC (Heat Sink Coolers)
      • HPC (Heat Pipe Coolers)
      • TEC (Thermoelectric Coolers)
      • VCC (Vapor Compression Coolers)
      • Enclosure Cooling Selection Tool
    • Space Thermal Control
      • Constant Conductance Heat Pipes
      • Variable Conductance Heat Pipes
      • Space Copper-Water Heat Pipes
      • Loop Heat Pipes
      • Space VPX
      • Liquid Cooling
    • HVAC Energy Recovery
      • AAHX
      • WAHX
  • Engineering Services
    • Research & Development
      • Our Research & Development Team
      • Emerging Technology
      • Technical Papers
      • Other Research Interests
    • Product Development
    • Space Thermal & Structural Analysis
    • Manufacturing
    • Lifecycle Management
  • Industries
    • Energy
      • Wind Energy
      • Nuclear Energy
      • Power Conversion
      • Energy Storage
      • HVAC Energy Recovery
    • Space
    • HVAC Energy Recovery
    • Defense
    • Medical
    • Data Centers
    • Other
  • Resources
    • Blog
    • Calculators & Selection Tools
      • AAHX Selection Tool
      • Enclosure Cooling Selection Tool
      • Heat Pipe Calculator
      • PCM Calculator
      • WAHX Selection Tool
    • Publications
      • Published Articles
      • Patents
      • Technical Papers
    • Learning Center
      • Heat Pipe Learning Center
      • Pumped Two-Phase Learning Center
      • PCM Learning Center
      • HVAC Learning Center
      • Videos
      • eBooks
      • Brochures
      • Case Studies
      • Webinars
    • Find your Rep
  • Shop
    • Sealed Enclosure Coolers
    • Heat Pipe Coolers
      • Heat Pipe Cooler Accessories
    • Heat Sink Coolers
      • Heat Sink Cooler Accessories
    • Thermoelectric Coolers
    • Vapor Compression Coolers
  • About
    • Careers
    • Events
    • News
    • Sustainability
    • ACT Leadership
  • Contact
  • Thermal Solutions
    • Passive Thermal Solutions
      • Heat Pipes
        • HiK Plates­™/ Heat Pipe Assemblies
        • Pulsating Heat Pipes
        • Vapor Chambers
        • High Temperature Heat Pipes
      • Loop Thermosyphon
      • Phase Change Based Solutions
        • PCM Heat Sinks
      • Liquid Cold Plates
    • Active Thermal Management Solutions
      • Liquid Cooling
      • Pumped Two-Phase
      • Liquid-Air HX
      • Tekgard® ECUs
      • Vaphtek™ ECU
      • Tekgard® Chillers
    • Embedded Computing Solutions
      • ICE-Lok®
      • VME/ VPX Card Frames
      • Conduction Cooled Chassis
      • Liquid Cooled Chassis
    • Enclosure Cooling Products
      • HSC (Heat Sink Coolers)
      • HPC (Heat Pipe Coolers)
      • TEC (Thermoelectric Coolers)
      • VCC (Vapor Compression Coolers)
      • Enclosure Cooling Selection Tool
    • Space Thermal Control
      • Constant Conductance Heat Pipes
      • Variable Conductance Heat Pipes
      • Space Copper-Water Heat Pipes
      • Loop Heat Pipes
      • Space VPX
      • Liquid Cooling
    • HVAC Energy Recovery
      • AAHX
      • WAHX
  • Engineering Services
    • Research & Development
      • Our Research & Development Team
      • Emerging Technology
      • Technical Papers
      • Other Research Interests
    • Product Development
    • Space Thermal & Structural Analysis
    • Manufacturing
    • Lifecycle Management
  • Industries
    • Energy
      • Wind Energy
      • Nuclear Energy
      • Power Conversion
      • Energy Storage
      • HVAC Energy Recovery
    • Space
    • HVAC Energy Recovery
    • Defense
    • Medical
    • Data Centers
    • Other
  • Resources
    • Blog
    • Calculators & Selection Tools
      • AAHX Selection Tool
      • Enclosure Cooling Selection Tool
      • Heat Pipe Calculator
      • PCM Calculator
      • WAHX Selection Tool
    • Publications
      • Published Articles
      • Patents
      • Technical Papers
    • Learning Center
      • Heat Pipe Learning Center
      • Pumped Two-Phase Learning Center
      • PCM Learning Center
      • HVAC Learning Center
      • Videos
      • eBooks
      • Brochures
      • Case Studies
      • Webinars
    • Find your Rep
  • Shop
    • Sealed Enclosure Coolers
    • Heat Pipe Coolers
      • Heat Pipe Cooler Accessories
    • Heat Sink Coolers
      • Heat Sink Cooler Accessories
    • Thermoelectric Coolers
    • Vapor Compression Coolers
  • About
    • Careers
    • Events
    • News
    • Sustainability
    • ACT Leadership
  • Contact
0
Cart Icon View Cart

Lancaster Research Facility Testing Lehigh University Carbon Capture Technology

By: Cris Collingwood
January 9, 2023

Illustration of CO2 capture system being tested by Advanced CoolingTechnologies – illustration by Josh Charles –
Illustration of CO2 capture system being tested by Advanced Cooling Technologies – illustration by Josh Charles –

Advanced Cooling Technologies is working with Lehigh University to test a process to capture carbon dioxide (CO2) from the air. Josh Charles, lead research and design engineer for the Lancaster-based company, said with a grant from the U.S. Department of Energy, his team is testing a direct air CO2 capture mechanism developed by Arup Sen Gupta, PC Rossin professor, Department of Civil and Environmental Engineering at Lehigh University. While in the concept phase, Charles said his team is testing the system to see if it can pull carbon out of the air and store it to improve the environment and fight climate change. So far it is working. “The removal of CO2 is crucial to curbing carbon emissions, one of the contributing greenhouse gases,” he said. The Small Business Innovative Research funding has allowed Charles and his team to develop the project. The test set up was designed to scale up and use low-voltage renewable energy sources such as wind or solar power to capture the air. The system, he said, pulls air through small spherical balls made of a resin. The carbon is captured by running an alkaline solution through the balls. It can then be stored in containers in old oil or gas wells underground. “The typical method to capture carbon uses heat which takes energy,” he said. “We are doing it without heat.” The process uses solar or wind power instead, which makes the process more flexible and can be used in more places. Sen Gupta said the use of electricity results in minimal energy use. The process uses absorbent material that air passes through, but the CO2 doesn’t. “The filter capacity is important,” he said. Most CO2 comes from industrial stacks, Sen Gupta said. There are systems that can capture 15% at that point. What he was looking for was a way to capture as much as possible from air anywhere. “If we can establish something where we can capture as much as 15% from anywhere, we can transform change,” he said. “This is a small scale right now,” Charles said. “Once we get reimbursement for phase 2, we will ramp up the testing on a larger scale.” The proposals are being written and Advanced Cooling Technologies hopes to have funding by this summer. The system is set up in a shipping container-sized contraption. “It’s meant to be capable of being placed anywhere,” he said. The project is scalable, Charles said. The unit will capture a minimum of 500 tons of CO2 per year. “It could potentially scale to thousands,” he said, as the units can be built larger and stack on top of one another. “Dr. Sen Gupta envisions deploying this anywhere, especially in third world countries where they are experiencing climate change,” Charles said. “If they want to be part of the {climate change} solution, they can use it.” Domestically, Charles said large companies will be able to use this on a large scale to reduce emissions, but anyone can use it on a smaller scale. “The challenge,” Sen Gupta said, “is when we remove it {from the air}, where does it go. Right now, we are looking at underground.” Charles said storing the carbon underground shouldn’t hurt the environment. “Look at natural gas. We pull it out for use so then we could fill that space with CO2.” He added that there is a concern that CO2 could leak out which would undo what the system has done by removing it. However, “there is no contamination risk because we are putting it back where it came from, just more concentrated.”

Read the full article here

ACT Logo
Advanced Cooling Technologies, Inc.
1046 New Holland Avenue
Lancaster, Pennsylvania 17601, USA
(717) 295-6061 Contact Our Experts
linkedin youtube twitter facebook
  • shop products online
  • sitemap
  • privacy policy
  • terms & conditions
  • ISO9001 & AS9100 CERTIFIED, ITAR REGISTERED

Copyright 2025. All rights reserved.