ACT-LNC-20 Low Noise Cooler 20 Watts/°C

 Low Noise Cooling, 20 Watts/°C

  • A patent pending passive sealed enclosure cooler design consisting of a smaller aluminum finned heat sink and a larger, extruded aluminum heat sink bonded to the opposite sides of a common mounting plate
  • The smaller heat sink side has a dedicated fan impinging hotter air inside the enclosure onto the heat sink. There are four additional 40mm fans that provide increased airflow to reach 20 Watts/°C
  • The larger, extruded heat sink side has ultralow power fans for quiet, fan assisted, natural convection heat dissipation to the outside ambient
  • Multiple heat pipes are embedded in the mounting plate, efficiently spreading heat from the smaller heat sink side to the larger heat sink side
  • “Thin profile”, i.e., only 3.70″ intrusion into the enclosure
  • Similar to the HSC series: dual axial ball bearing fans for years of maintenance free operation, rugged high quality construction, ease of installation, and a minimum number of penetrations by cover fasteners, mounting fasteners or external fan wires

ACT-LNC-20 Performance & DimensionsACT-LNC-20 Data Bar

 

ACT-LNC-20 Bar

Environment…………………………Indoor or Outdoor Use

Electrical Configuration……………115VAC, 230VAC, 12VDC, 24VDC and 48VDC
………………………………………….  – AC units arrive with 6ft. long 3-pronged plug
………………………………………….  – DC units arrive with bare lead wires

NEMA Options……………..………12, 3R, 4 and 4X

Fans……………………………….. UL Listed 6.0” dual ball bearing type axial fans (dry & wet locations)

Mounting Plate…………………… Aircraft quality 6061 aluminum

Housing…………………………… Powder coated aluminum

Mounting Options………………… Side, front or back

 

ACT-LNC-20 Dimensions

ACT-LNC-10 Cutout